 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Philips Semiconductors Linear Products Product specification Dual high-performance operational amplifier NE/SA/SE5512 DESCRIPTION The 5512 series of high-performance operational amplifiers provides very good input characteristics. These amplifiers feature low input bias and voltage characteristics such as a 108 op amp with improved CMRR and a high differential input voltage limit achieved through the use of a bias cancellation and PNP input circuits with collector-to-emitter clamping. The output characteristics are like those of a 741 op amp with improved slew rate and drive capability, yet have low supply quiescent current. PIN CONFIGURATIONS N Package OUTPUT 1 -INPUT 1 +INPUT 1 V1 2 3 4 TOP VIEW 8 7 6 5 V+ OUTPUT 2 -INPUT 2 +INPUT 2 APPLICATIONS * AC amplifiers * RC active filters * Transducer amplifiers * DC gain block * Battery operation * Instrumentation amplifiers FEATURES D Package1 + INPUT 1 V+INPUT 2 -INPUT 2 1 2 3 4 2 1 8 7 6 5 -INPUT 1 OUTPUT 1 V+ OUTPUT 2 TOP VIEW NOTE: 1. The D package pinout is not functionally identical to the N pinout. * Low input bias < 20nA * Low input offset current < 20nA * Low input offset voltage <1mV * Low VOS temperature drift 5V/C * Low input bias temperature drift 40pA/C * Low input voltage noise 30nV/Hz * Low supply current 1.5mA/amp * High slew rate 1.0V/s * High CMRR 100dB ORDERING INFORMATION DESCRIPTION 8-Pin Plastic Small Outline (SO) Package 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) Package 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) * High input impedance 100M * High PSRR 110dB * High differential input voltage limit * No crossover distortion * Indefinite output short circuit protection * Internally-compensated for unity gain * 600 drive capability * MIL-STD processing available TEMPERATURE RANGE 0 to 70C 0 to 70C -40 to +85C -40 to +85C -55 to +125C ORDER CODE NE5512D NE5512N SA5512D SA5512N SE5512N DWG # 0174C 0404B 0174C 0404B 0404B August 31, 1994 78 853-0948 13721 Philips Semiconductors Linear Products Product specification Dual high-performance operational amplifier NE/SA/SE5512 ABSOLUTE MAXIMUM RATINGS SYMBOL VCC PD MAX Supply voltage Maximum power dissipation, TA=25C (still air)1 N package D package TA Operating ambient temperature range NE5512 SA5512 SE5512 TSTG TSOLD Storage temperature range Lead soldering temperature (10sec max) 0 to +70 -40 to +85 -55 to +125 -65 to +150 300 C C C C C 1212 800 mW mW PARAMETER RATING 16 UNIT V NOTES: 1. The following derating factors should be applied above 25C N package at 9.7mW/C D package at 6.4mW/C August 31, 1994 79 Philips Semiconductors Linear Products Product specification Dual high-performance operational amplifier NE/SA/SE5512 ELECTRICAL PERFORMANCE CHARACTERISTICS VCC = 15V, TA = 25C over temperature range, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS RS=100 TA=+25C Over temp. RS=100k TA=+25C Over temp. RS=100k TA=+25C Over temp. TA=+25C TA=+25C Over temp. VCC=15V VIN=13.5V TA=+25C VIN=13V Over temp. RL=2k TA=25C 70 100 70 100 dB 13.5 13 SE5512 Min Typ 0.7 1 4 Input offset current 3 4 30 Input bias current 3 4 30 Input resistance differential Input common mode range 100 13.7 13.2 13.5 13 10 20 10 20 Max 2 3 Min NE/SA5512 Typ 1 1.5 5 6 8 40 6 8 40 100 13.7 13.2 20 30 20 30 Max 5 6 UNIT VOS VOS/T IOS IOS/T IBIAS IBIAS/T RIN VCM Input offset voltage mV V/C nA pA/C nA pA/C M V CMRR Input common-mode rejection ratio AV SR GBW M VOUT Large-signal voltage gain Slew rate Small-signal unity gain bandwidth Phase margin Output voltage swing VO=10V over temp. TA=25C TA=25C TA=25C RL=2k TA=25C Over temp. RL=6001 TA=25C Over temp. RL=Open TA=25C Over temp. Over temp. f=1kHz to 20kHz, TA=25C f=10kHz TA=25C VO=7VRMS f=1kHz TA=25C f=1kHz TA=25C 15V, TA=25C 50 25 0.6 200 1 3 45 50 25 200 1 3 45 V/mV V/s MHz degree V 13 12.5 10 7.5 13.5 13 11.5 9 3.4 3.6 5 5.5 13 12.5 10 8 13.5 13 11.5 9 3.4 3.6 5 5.5 VOUT Output voltage swing V ICC PSRR AA Power supply current Power supply rejection ratio Amplifier-to-amplifier coupling mA dB dB 80 100 -120 0.01 80 100 -120 0.01 THD Total harmonic distortion % VNOISE INOISE ISC Input noise voltage Input noise current Short-circuit current 30 0.2 40 30 0.2 40 nV/Hz pA/Hz mA NOTES: 1. Not to exceed maximum package power dissipation. August 31, 1994 80 Philips Semiconductors Linear Products Product specification Dual high-performance operational amplifier NE/SA/SE5512 EQUIVALENT SCHEMATIC (ONE OP AMP) V+ -VIN +VIN OUTPUT -V August 31, 1994 81 |
Price & Availability of NE5512N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |